Alarm Testing procedure   

The best way to test your alarm and communication is to actualy set your and trip the zones/devices you wish to test. 

1. Call the central Station and inform them that you are going to test your alarm they will ask for your password or account #
2. Now you can arm your system as if you were leaving the house. Let the delay time expire (your krypad will stop beeping.
3. At this point you can open doors or walk through motion detectors until you hear your siren.
4. Remember if you open your door from the garage there is a delay to let you enter the house. 
5. Once you have the alarm activated and the siren sounding for approx 30 seconds you can turn off your alarm at the keypad just like you normally do.
6. Now you can call the central station and ask them if thay recieved your signals and ask them to tell you what signals they did receive.
7. I you have any problems call the service # below during normal business hours.
8. If you have an issue after hours you can call the Cetral Station at the Monitoring # below. 
    

Michigan Property Protection Service # 248-987-6133     Michigan Property Protection  Monitoring # 1 888 969 2774